Can Steam Deck Run Jelly Bubble?
Steam Deck compatibility check and performance analysis
Playable: works with adjustments
Valve's official Steam Deck compatibility rating for Jelly Bubble
Spec-based estimate
On paper its GPU is 51% of the PC recommended GPU. PC specs assume 1080p; the Deck plays at 800p and Valve's test is what counts.
Performance Estimate
Based on the Steam Deck GPU (RDNA 2, about a Radeon RX 560, 4,550 pts) at its native 1280x800. Real performance depends on the game's optimization and Proton.
Spec Comparison
| Component | Steam Deck | Minimum | Recommended | Status |
|---|---|---|---|---|
| GPU | RDNA 2 (Score: 4,550) | NVIDIA GTX750-TI or AMD RX550, 2GB VRam (2,900) | NVIDIA GTX1060 or AMD RX 580, 4GB VRam (8,900) | Below |
| CPU | Zen 2, 4c/8t (Score: ~15,000) | Intel i5 or AMD equivalent CPU | Intel i5 or AMD equivalent CPU | — |
| RAM | 16 GB LPDDR5 | 8 GB | 16 GB | Pass |
| Storage | 64GB / 256GB / 512GB / 1TB | 2 GB | 2 GB | — |
| Display | 1280x800, 7" / 7.4" OLED | — | OK | |
PC requirements are written for a desktop at 1080p or higher. The Deck renders at 1280x800, so a GPU below the PC spec on paper doesn't mean it won't run: Valve's test is the one that counts.
Frequently Asked Questions
Can Steam Deck run Jelly Bubble?
Yes, Jelly Bubble is rated Playable on Steam Deck: it runs, but may need manual tweaks such as graphics settings or the on-screen keyboard. On paper the Deck's GPU (4,550 pts) is 51% of the PC recommended GPU, but PC requirements assume 1080p and Valve tested it at the Deck's 800p.
What settings should I use for Jelly Bubble on Steam Deck?
For Jelly Bubble on Steam Deck, start from Valve's tested defaults at 800p and lower settings if the frame rate dips. On PC the game recommends a GeForce GTX 1060; the Deck's GPU is roughly a Radeon RX 560 (4,550 pts) and falls below that on paper.
Does Jelly Bubble have Steam Deck verified status?
Jelly Bubble is marked as Playable, not Verified, on Steam Deck. It works but doesn't meet every Verified criterion, so you may need some manual adjustments.
